| 1 | REBUILD KIT (bearings, seal, shims & hardware) | 16501.02 |
2 | GASKET, FRONT AXLE COVER | 16502.01 |
3 | STANDARD DIFFERENTIAL CASE (w/ gasket, shims & ring bolts) | |
| W/ 2.73 TO 3.55 RATIO | 16503.04 |
| W/ 3.73 TO 4.56 RATIO | 16503.05 |
3A | SPIDER GEAR KIT STANDARD DIFFERENTIAL (w/ seal & bolts) | 16507.03 |
3B | CASE ASSEMBLY KIT STANDARD DIFFERENTIAL: | |
| 1990-96, 3.07 - 3.55 RATIO, SPICER (item #3 & 3A) | 16505.01 |
| 1990-96, 3.73 - 4.10 RATIO, SPICER (item #3 & 3A) | 16505.02 |
| 1987-89, 3.07 - 3.55 RATIO, SPICER (item #3 & 3A) | 16505.03 |
| 1987-89, 3.73 - 4.10 RATIO, SPICER (item #3 & 3A) | 16505.04 |
4 | BEARING KIT DIFFERENTIAL SIDE (2 bearings & 2 cups) | 16509.05 |
5 | SHIM SET KIT, FOR SIDE BEARINGS & PINION BEARINGS & HARDWARE | 16512.02 |
6 | RING & PINION KIT (w/ pinion bearings & cups, pinion nut & washer, oil seal & slinger, ring bolts, shim kit) (all ring & pinions are reverse rotation) | |
| 3.07 RATIO (43X14 TEETH) | 16513.20 |
| 3.54 RATIO (39X11 TEETH) | 16513.21 |
| 3.73 RATIO (41X11 TEETH) | 16513.22 |
| 4.10 RATIO (41X10 TEETH) | 16513.23 |
| 4.56 RATIO (41X9 TEETH ) | 16513.24 |
| 4.88 RATIO (ring & pinion only, need seperate rebuild kit) | 16513.25 |
7 | OUTER PINION BEARING KIT (1 bearing & 1 cup) | 16517.01 |
8 | OUTER PINION BEARING OIL SLINGER | 16512.52 |
9 | INNER PINION BEARING KIT (1 bearing & 1 cup) | 16515.02 |
9A | INNER PINION OIL SLINGER | 16512.51 |
10 | INNER PINION BEARING BAFFLE | 16512.53 |
11 | NUT, PINION | 16584.01 |
12 | WASHER, PINION | 16584.02 |
13 | OIL SEAL, PINION | 16521.01 |
| OIL SEAL, PINION-NATIONAL BRAND | 16521.02 |
14 | OIL SEAL, INNER SIDE OF THE AXLE, RIGHT | 16526.03 |
15 | OIL SEAL, INNER SIDE OF THE AXLE, LEFT | 16526.02 |
16 | BOLT FOR RING GEAR (each, 10 needed) | 16522.01 |
16A | DIFF COVER BOLT, DANA-30, 35, 44, & AMC-20 | 16522.02 |
17 | YOKE, U-BOLT STYLE | 16580.02 |
| YOKE, STRAP & BOLT STYLE | 16580.07 |
18 | U-BOLT PAIR KIT FOR U-BOLT STYLE YOKE | 16582.01 |
| SPICER BRAND | 16582.02 |
19 | STRAP & BOLT KIT FOR STRAP & BOLT STYLE YOKE | 16582.03 |
20 | U-jOINT KIT, LEFT OR RIGHT | |
| 1987-94, GREASABLE, | 16525.01 |
| 1987-94, GREASABLE, SPICER BRAND | 16525.02 |
| 1987-94, NON-GREASABLE, SPICER BRAND | 16525.03 |
| 1995, GREASABLE, | 16525.04 |
| 1995, NON-GREASABLE, SPICER BRAND | 16525.05 |
| 1995-UP, GREASABLE, SPICER BRAND | 16525.06 |
21 | AXLE SHAFT ASSEMBLY, OUTER PASSENGER SIDE 1987-95 W/O ABS | 16523.08 |
21 | AXLE SHAFT ASSEMBLY, OUTER PASSENGER SIDE 1990-95 W/ABS | 16523.10 |
21 | AXLE SHAFT ASSEMBLY, DRIVER SIDE, 1987-95 w/O ABS | 16523.09 |
21 | AXLE SHAFT ASSEMBLY, DRIVER SIDE, 1990-95 W/ABS | 16523.11 |
22 | AXLE SHAFT, INNER PASSENGER SIDE (all models) | 16523.12 |
| OUTER AXLE SHAFT, 1987-94 (w/o ABS), FITS LEFT OR RIGHT | 16523.13 |
23 | 1987-89 INNER BUSHING BEARING TBA | 16527.05 |
| 1990-95 INNER BUSHING BEARING (w/o ABS) | 16527.06 |
24 | 1987-89 OUTER BEARING | 16527.07 |
| 1990-95 OUTER BEARING | 16527.08 |
25 | 1987-90 AXLE DISCONNENT MOTOR ASSEMBLY TBA | 16527.09 |
| 1991-95 AXLE DISCONNECT MOTOR ASSEMBLY | 16527.10 |
26 | 1987-95 AXLE DISCONNECT SHIFT FORK COLLAR TBA | 16527.11 |
27 | 1987-95 AXLE DISCONNECT SHIFT FORK | 16527.12 |
28 | 1987-95 AXLE DISCONNECT MOTOR RETAINING CLIP | 16527.13 |
29 | 1987-95 AXLE DISCONNECT SHIFT FORK INSERT | 16527.14 |
30 | 1987-95 AXLE DISCONNECT SERVO RING TBA | 16527.15 |
31 | 1991-95 AXLE DISCONNECT HOUSING COVER TBA | 16527.16 |
32 | 1991-95 AXLE DISCONNECT SWITCH ASSEMBLY TBA | 16527.17 |
33 | 1987-95 AXLE DISCONNECT SHIFT FORK SNAP RING | 16527.18 |
34 | 1987-95 AXLE DISCONNECT HOUSING COVER GASKET | 16527.19 |
35 | DIFFERNTIAL COVER KIT STAINLESS STEEL INCLUDES GASKET & BOLTS | 11118.01 |
36 | HEAVY DUTY DIFFERENTIAL COVER, 3/8” THICK CAST STEEL, W/ HARDWARE (UPGRADE) | 16595.30 |
37 | HEAVY DUTY DIFFERENTIAL SKID PLATE, 3/8” THICK CAST STEEL, W/ HARDWARE (UPGRADE) | 16597.30 |
38 | BALL jOINT KIT (upper & lower w/ hardware) | 18036.02 |
